全光固体条纹相机的理论及其静态实验研究

全光固体条纹相机采用空间调制抽运光激发平板波导光偏转器,通过精确控制抽运光和信号光之间的时间延迟,实现对入射到波导芯层信号光的偏转扫描.它能有效解决传统变像管条纹相机因空间电荷效应造成的动态范围降低以及光电阴极材料在红外波段探测受限等问题,且结构简单,系统稳定性高,理论时间分辨率可达皮秒甚至亚皮秒量级.本文围绕全光固体条纹相机的核心部件—–AlxGa1-xAs/GaAs/AlxGa1-xAs平板波导光偏转器,研究了在带填充效应、带隙收缩效应以及自由载流子吸收效应作用下GaAs折射率的变化情况;在GaAs折射率变化达到0.01量级,信号光束斑大小和波导宽度之比p=0.5时,得到系统的理论时间分辨率为2 ps;按照静态实验条件求得的理论空间分辨率为17 lp/mm,实验结果显示其值为9 lp/mm.     

Prototype Demonstration of Discrete Correlation Processor-2 Based on High-Speed Optical Image Steering for Large-Fan-Out Reconfigurable Optical Interconnections

We present a discrete correlation processor-2 (DCP-2), which is an optical processor with reconfigurability of interconnection patterns for large-fan-out optical interconnection systems. To our knowledge, there is no reconfigurable optical processor satisfying the requirements for large fan-outs such as high-speed reconfiguration of interconnection pattern, high optical efficiency, and high contrast ratio, because existing spatial light modulators (SLM#x0027;s) lack at least one of these features. The DCP-2 architecture fulfills the requirements by using a hybrid configuration composed of a high-speed image steerer and a spatial light modulator, which work in a complementary manner to shorten the setup time of the SLM. We constructed two kinds of prototype demonstrators based on this architecture. In the experiment, reconfiguration speed of the DCP-2 prototype with shift-invariant optical interconnections, in which a liquid crystal SLM cooperated with a two-dimensional acousto-optic beam deflector, was about 26,000 times faster than that of the standalone SLM at the cost of 50#x0025; energy loss by the deflector.     

On front solutions of the saturation equation of two-phase flow in porous media

We investigate the existence of “front” solutions of the saturation equation of two-phase flow in porous media. By front solution we mean a monotonic solution connecting two different saturations. The Brooks–Corey and the van Genuchten models are used to describe the relative-permeability – and capillary pressure–saturation relationships. We show that two classes of front solutions exist: self-similar front solutions and travelling-wave front solutions. Self-similar front solutions exist only for horizontal displacements of fluids (without gravity). However, travelling-wave front solutions exist for both horizontal and vertical (including gravity) displacements. The stability of front solutions is confirmed numerically.     

LiNbO3电光偏转器的研究

从电光效应出发，对ＬｉＮｂＯ３电光偏转器的基本品质因子进行研究，导出了偏转器的设计公式，用有限差分法计算了四柱面电极电光偏转器的电场分布，对不同结构参数，给出了梯度线性度和结构因子。     

Two-axis-scanning laser Doppler vibrometer for precision engineering

Laser Doppler vibrometer (LVD) has been the most favorite instrument for precision dynamics measurement due to its non-contact, high accuracy and high resolution. However, LDV can only give the dynamic data of a particular location on the entire feature. In order to get the whole field data, a laser beam-scanning mechanism has to be implemented. Currently, motor-driven scanning mirror is used to move the measurement probe from one point to another. The mechanical vibrations of the scanning mirror will reduce the measurement accuracy. This paper introduces a novel scanning LDV optical system embodied in an acousto-optic deflector scanning mechanism. It can improve the measurement accuracy since there is no mechanical motion involved. One main advantage of this system is that it generates a laser scanning beam in parallel that is different from the beam scanning in the conventional scanning laser Doppler vibrometer (SLDV). The new system has a board scanning range. The measurement target size ranges from few tens of millimeters down to 10 μm. We have demonstrated the capability of the novel system on scanning measurements of features as big as ultra-precision cutting tool to features as tiny as AFM cantilever. We believe that the novel SLDV will find profound potential applications in the precision engineering field.     

Laser spectroscopic investigation of a new precursor-type polyparaphenylenevinylene

Optical, structural and morphological properties of thin films of polyparaphenylenevinylene (PPV) formed by an alkyl sulfinyl precursor route have been studied. Thin films were fabricated on an optical glass and on quartz glass either by spin-coating of the precursor solution or by layer-by-layer deposition using Langmuir–Blodgett technique. PPV precursor films were also spin-coated on gold-coated glass in order to study thin-film optical parameters by surface plasmon spectroscopy. We have been successful in forming about 40 precursor mono layers on quartz glass by Langmuir–Blodgett technique using optimized surface pressure and dipping conditions. After thermal conversion of the precursor layers good quality fluorescent PPV films of yellow colour have been obtained. Optical characterization of the films was carried out by linear absorption and emission spectroscopy, ellipsometry, and surface plasmon spectroscopy. Structural and morphological studies on the thin films were carried out by using X-ray scattering and atomic force microscopy. Wave-guided travelling-wave laser action has been achieved in a PPV film on quartz glass. The sample was transversally pumped with picosecond laser pulses (wavelength 347.15 nm, duration 35 ps). Laser emission occurred at 550 nm for pump pulse energy densities above .     

基于声光效应的光束偏转控制理论研究

基于参量互作用观点及声光互作用原理,构建了入射光为高斯光并且存在声波吸收情况下的声光偏转器模型.基于此模型研究了超声波频率、声波功率和光束入射角对衍射光的影响.对比了有声波吸收和无声波吸收两种情况下上述三个参量对衍射光产生的不同影响.计算结果表明,同无声光吸收时相比,当存在声波吸收时,偏转器的衍射效率将减小,导致衍射波形畸变,光强峰值位置发生偏移.     

Rapid wavelength scanning based on acousto-optically tuned external-cavity laser diode

High-speed, wide-range wavelength scanning is demonstrated using a laser diode with an antireflection coating and an external cavity employing an acousto-optic deflector. The narrow spectral width of 0.2 nm observed in the experiment indicates the availability of a highly coherent laser beam. The scanning range of 15 nm under rapid modulation is confirmed in the prototype system. A tuning rate of more than 100 kHz is achieved without any mode hops. To the best of our knowledge, no such high-speed wavelength tuning based on an acousto-optical configuration has been demonstrated thus far.     

声光栅正弦结构光投射器的光学系统设计

针对一种新型的声光波干涉测量技术,对声光栅正弦结构光投射器的三维测量工作原理进行了系统的分析,讨论了影响投射器光学系统结构的因素和影响接收屏上的光照度的因素,并进行了光学系统设计。在优化设计过程中,采用了限制光线最大入射角的方法,达到控制投射系统的球差和保证接收屏上照明均匀的要求。所设计的声光栅正弦光投射器具有很好的成像质量。应用该系统对在500mm处的石膏像上投射干涉条纹,可以得到能量比较均匀、变形量很小的干涉条纹图,利用该条纹图和相关的算法可以对具有复杂几何形状的物体进行有效的三维测量。     

一种新型的变像管用复合聚焦-偏转系统

 介绍了一种新型的多极式偏转器——8瓣状多极偏转器,它可通过将一旋转对称电极均匀开槽切割为８片而成。通过对圆周上各电极电位分布作傅里叶分析,获得了在其内部产生近乎均匀横向偏转场所需要的电极电位设置规律。由于其结构上的旋转对称性以及Laplace方程解的调和性,当在此8瓣偏转器各电极上同时叠加一聚焦透镜所需电位时,它所产生的场中多极场分量为16极场或者更多极场而不影响近轴区的聚焦效果,因而其能与常用的圆筒形电极相结合而形成复合聚焦-偏转系统。其具有的聚焦偏转特性也通过相关的定性分析得以验证。同时,这样结构上的优化也为变像管的小型化设计提供了可能性。